Chalkboard Placecards & Menus
Following on from my post about chalkboard menus I’ve been keeping my eyes open for nice ones I can use.
- 4” x 6” picture frames
- 1 sheet hardboard
- 1 primer (for hardboard)
- 1 blackboard paint (for hardboard)
- 1 L latex primer (for frame)
- 1 L latex paint (for frame)
Step 1: Prepare frames
Step 2: Apply blackboard paint
The keys to success are to apply several coats (two to three), let each dry thoroughly, and allow the final coat to cure for several days before writing on the surface.
To prepare the surfaces, lightly sand the area with 120- or 140-grit sandpaper (this will allow the paint to adhere best to the surface). Wipe the surface with a damp cloth to clean away all dust.
Using low-tack masking tape, carefully tape off the area you will be painting.
Apply a coat of primer
Apply a coat of blackboard paint
Apply a second coat of blackboard paint. Leave to dry thoroughly. If needed, apply a third coat. Wait at least three days (and ideally seven) before writing on the blackboard surface.
Paint the picture frames to finish the look.
Category: DIY, Venue Decoration Comment »








